﻿********************************************************************
KONICA MINOLTA Box Operator 3.2.33000
                                                          10/09/2021

Copyright (C) 2005 KONICA MINOLTA, INC.
********************************************************************
Ce fichier contient des informations sur l'utilisation de Box Operator.
Assurez-vous de bien lire ce fichier avant d'utiliser l'application.

1. Introduction
2. Conditions système requises
3. Systèmes supportés 
4. Guide d'installation/de désinstallation
5. Procédure de vérification de la version dans l'application
6. Fonctions restreintes / restrictions connues

********************************************************************
1. Introduction
   Box Operator est un logiciel qui ajoute des fonctions à
   l'explorateur Windows, vous permettant d'accéder, dans une boîte sur un
   produit multifonction, à des fichiers numérisés ou faxés, et de les gérer,
   c'està dire les récupérer, les supprimer et les renommer.

********************************************************************
2. Conditions système requises
 
  SE supportés : 
        Veuillez vous référer au document « Appendix1_OS_SupportInfo.txt » en annexe.
        - Veuillez utiliser la dernière version de chaque système d'exploitation.
        - Il peut y avoir des notes/limitations en fonction de vos systèmes d'exploitation. 
          Veuillez consulter le point « 6. Fonctions restreintes / restrictions connues » 
          pour obtenir des informations additionnelles.

  Réseau : 
        Protocole TCP/IP doit être correctement paramétré.

  Pour utiliser Box Operator, il faut installer le logiciel suivant
  sur l’ordinateur.
        Adobe Reader ou Adobe Acrobat
        Autre logiciel nécessaire pour gérer et modifier les images 

********************************************************************
3. Systèmes supportés 

Veuillez vous référer au document « Appendix2_Device_SupportInfo.txt » en annexe.
Il peut y avoir des notes/limitations en fonction de votre périphérique. Veuillez consulter le point 
« 6. Fonctions restreintes / restrictions connues » pour obtenir des informations additionnelles.

********************************************************************
4. Guide d’installation/de désinstallation

Veuillez vous référer au manuel opératoire.
De plus, le programme d'installation de Box Operator est différent pour les systèmes 
d'exploitation 32 bits (x86) et 64 bits (x64).
Vérifiez votre système d'exploitation et utilisez le programme d'installation approprié.

********************************************************************
5. Procédure de vérification de la version dans l'application

Vous pouvez vérifier la version à partir d’une application en cours 
à l’aide de la procédure suivante.

 1. Dans le menu [Box Operator], cliquez sur [A propos de Box Operator...].
 2. Les informations sur la version sont comprises dans la boîte de dialogue.

********************************************************************
6. Fonctions restreintes / restrictions connues

Selon le produit multifonctions utilisé, certaines fonctions Box Operator
peuvent ne pas être disponibles. Pour plus de détails, voir les informations
qui accompagnent votre produit.

Lorsque la version 2.0.x ou la version 3.0.00000 ou la version 3.0.00100 du
PageScope Box Operator est installée, veuillez installer cette version après
avoir désinstallé la version 2.0.x ou la version 3.0.00000 ou la version 3.0.00100.
Les réglages des versions 2.0.x ou 3.0.00000 ou 3.0.00100 seront écrasés. 
Veuillez donc les noter avant de désinstaller ces versions.

L'application peut prendre un certain temps à démarrer. Dans un tel cas, effectuez les opérations suivantes.
1) Lancez Internet Explorer
2) Ouvrez Options Internet dans le menu Outils.
3) Ouvrez l'onglet Avancé et désactivez le paramètre suivant:
    "Vérifier la révocation des certificats"

Quand "Contrôle compte d'utilisateur :Élever uniquement les exécutables signés et validés"
est activé dans la Police de Sécurité Locale de Windows Vista/Server 2008,
il n'est pas possible de désinstaller le programme en utilisant "Programmes et fonctionnalités" du panneau de commande. 
Pour désinstaller le programme, désactiver
"Contrôle compte d'utilisateur : Élever uniquement les exécutables signés et validés" dans
la Police de Sécurité Locale de Windows Vista/Server 2008 ou utilisez "setup.exe" utilisé pour l'installation du programme.

Regarding Searchable PDF Rotation Correction:
When the following settings are performed for a document in the MFP used:
 - High level security setting (Encryption for Digital Signature, Digital ID)
 - PDF property settings
and a Searchable PDF with Rotation Correction is retrieved, there is a
possibility of image and text position getting changed.

Depending upon the environment being used, short cut directory to the
application may remain in the Start menu, after the application has been uninstalled.
Because of this there should not be any problem in any of the operations.
If required, please delete it manually.

When executing Move To Folder/Copy To Folder, length of a path of
destination/ target device including file name should be less than 256
(255 or less) one-byte characters or it fails to forward files.
This is by design of the OS(x86).

Afin d'utiliser la fonction « Imprimer après la fusion des fichiers »,
Adobe Reader ou Adobe Acrobat doit être spécifié comme programme par défaut pour ouvrir le PDF.
Veuillez noter qu'un programme différent est spécifié comme programme par défaut pour
Windows 8.1 / Windows 10.

Lorsque le périphérique de destination ne peut pas utiliser les fonctions associées à la boîte pour des raisons 
comme la non installation du HDD, il ne peut pas être connecté depuis Box Operator.

Lorsque la version 3.2.25000 du PageScope Box Operator est installée,
veuillez installer cette version après avoir désinstallé la version 3.2.25000 en suivant le message affiché.

En cas d'installation sur Windows 10 et si la connexion est effectuée en tant qu'« Utilisateur standard »,
il se peut que l'icône Box Operator n'apparaisse pas correctement quand le Menu Démarrer est affiché.
Vous pouvez continuer à utiliser l'application en l'état ou corriger le problème
en vous connectant une fois en tant qu'« Administrateur » dans Windows 10.
L'icône s'affichera correctement pour toutes les connexions futures de l'Utilisateur standard.

********************************************************************
Windows est une marque de fabriques de la Microsoft Corporation 
aux États-Unis et dans d'autres pays.
Les autres noms d'entreprises et noms de produits sont des marques
de fabrique ou des marques déposées de leurs entreprises respectives.

********************************************************************
LibJPEG Copyright and License Agreement 

In plain English: 

1. We don't promise that this software works.  (But if you find any bugs, please let us know!) 
2. You can use this software for whatever you want.  You don't have to pay us. 
3. You may not pretend that you wrote this software.  If you use it in a program, 
    you must acknowledge somewhere in your documentation that you've used the IJG code. 

In legalese: 

The authors make NO WARRANTY or representation, either express or implied, with respect 
to this software, its quality, accuracy, merchantability, or fitness for a particular purpose.  
This software is provided "AS IS", and you, its user, assume the entire risk as to its quality 
and accuracy. 

This software is copyright (C) 1991-1998, Thomas G. Lane. 

All Rights Reserved except as specified below. 

Permission is hereby granted to use, copy, modify, and distribute this software (or portions 
thereof) for any purpose, without fee, subject to these conditions: 

(1) If any part of the source code for this software is distributed, then this README file must 
be included, with this copyright and no-warranty notice unaltered; and any additions, 
deletions, or changes to the original files must be clearly indicated in accompanying 
documentation. 

(2) If only executable code is distributed, then the accompanying documentation must state 
that "this software is based in part on the work of the Independent JPEG Group". 

(3) Permission for use of this software is granted only if the user accepts full responsibility for 
any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. 

These conditions apply to any software derived from or based on the IJG code, not just to the 
unmodified library.  If you use our work, you ought to acknowledge us. 

Permission is NOT granted for the use of any IJG author's name or company name in 
advertising or publicity relating to this software or products derived from it.  This software 
may be referred to only as "the Independent JPEG Group's software". 

We specifically permit and encourage the use of this software as the basis of commercial 
products, provided that all warranty or liability claims are assumed by the product vendor. 

********************************************************************
 LibTIFF Copyright and License Agreement 
     
Copyright (c) 1988-1997 Sam Leffler and Copyright (c) 1991-1997 Silicon Graphics, Inc. 

Permission to use, copy, modify, distribute, and sell this software and its documentation 
for any purpose is hereby granted without fee, provided that (i) the above copyright 
notices and this permission notice appear in all copies of the software and related 
documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in 
any advertising or publicity relating to the software without the specific, prior written 
permission of Sam Leffler and Silicon Graphics. 
     
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, 
IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
     
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, 
INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES 
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT 
ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING 
OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

********************************************************************
Copyright (c) 2006-2018 Arseny Kapoulkine

Permission is hereby granted, free of charge, to any person obtaining a copy of this 
software and associated documentation files (the “Software”), to deal in the Software 
without restriction, including without limitation the rights to use, copy, modify, merge, 
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons 
to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or 
substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 
OTHER DEALINGS IN THE SOFTWARE.